The development of cold recycling machines has been able to meet the requirements of economic development in recent years. It is impossible to build new high-grade highways in the future, so the maintenance of old pavement will become the main construction task in the future. In the even thicker pavements produced by the construction of the cold regenerator, the cold regenerator is rented, and there is no weak interface between the thinner pavements sometimes appeared in the traditional construction method. Cold regenerator leasing is loved by the majority of users because of its advantages of environmental protection and energy saving. At the same time, it can also improve construction conditions and reduce economic pressure. It is the primary choice for many small construction units.

那么，這兩種不同的修復方式究竟有哪些不同呢?，我們來為大家簡單的介紹下平時維修的方式。實際上，平時維修的主要目的在于盡可能使筑路機械保持良好的運行狀態，也就是說一旦有工作需要就可以立即進入工作的狀態。從這一點來看的話，冷再生機出租，我們就會發現，所謂的平時維修其實更側重于是在工作間隙，設備不工作的時候進行的。

So, what are the differences between these two different repair methods? First of all, let's briefly introduce the usual maintenance methods for you. In fact, the main purpose of normal maintenance is to keep the road construction machinery in good operation as far as possible, that is, it can enter the working state immediately once there is a need for work. From this point of view, if the cold regenerator is rented, we will find that the so-called ordinary maintenance actually focuses more on it, so it is carried out during the working gap and when the equipment is not working.

而如果遇到了比較緊急的情況的話，再按照平時維修的標準和程序進行修復的話，那么就會花費很多的時間，這樣就會嚴重影響到施工的進度和工期，而且也會降低筑路機械設備的利用率。所以，冷再生機租賃，平時修復和現場搶修在目標方面有很大的不同。

In case of an emergency, it will take a lot of time to repair according to the usual maintenance standards and procedures, which will not only seriously affect the construction progress and construction period, but also reduce the utilization rate of road construction machinery and equipment. Therefore, the objectives of cold regenerator leasing, peacetime repair and on-site emergency repair are very different.

坦白來講的話，維特根冷再生，我們所說的平時修復，其實是有一套具體的流程的。在進行平時修復的時候，我們需要按照既定的程序來保證筑路機械設備的全部功能，可以通過診斷、定位、隔離、修復校正等一系列的方法來使其恢復，而且主要是由一定技能的維修人員完成的。

Frankly speaking, wittgen cold regeneration, what we call ordinary repair, actually has a specific process. During normal repair, we need to ensure all functions of road construction machinery and equipment according to the established procedures. It can be restored by a series of methods such as diagnosis, positioning, isolation, repair and correction, and it is mainly completed by maintenance personnel with certain skills.